js33333线路登录(中国)集团有限公司

服务热线电话

400-6188-756

超声波清洗机一般在生产清洗流水线上使用

来源:/ 时间: 2024-04-17 浏览次数: 0

一般安装在某些特定物件清洗的生产流水线上。

Generally installed on production lines for cleaning specific items.

典型的软磁器件超声波清洗设备介绍:被清洗物件从进料口可传动的不锈钢网带送人超声波清洗槽清洗,再经喷淋、烘干等工序后出料,实现被清洗物件可直接包装入库。各工序简要说明如下:

Introduction to typical ultrasonic cleaning equipment for soft magnetic devices: The cleaned object is sent to the ultrasonic cleaning tank for cleaning through a stainless steel mesh belt that can be driven from the feeding port, and then discharged through processes such as spraying and drying, achieving direct packaging and storage of the cleaned object. A brief description of each process is as follows:

①进料:物件进料可采用半自动进料

① Feeding: Semi automatic feeding can be used for object feeding

20230531102222631.png

②压电式换能器目前国内外大多数超声波清洗机用的是压电式换能器,勘L形结构。

② Currently, most ultrasonic cleaning machines both domestically and internationally use piezoelectric transducers with L-shaped structures.

这种换能器一般有两片压电陶瓷晶片组成。一台清洗机用多个换能器,经粘接剂粘接在清洗缸底部且经并联联接组成一台清洗机的换能器。换能器基元之间距(对于频率20kH4一般在5—10mm为佳,太大了容易产生弯曲振动,且振动板受到腐蚀,同时辐射面相对减少。

This type of transducer generally consists of two piezoelectric ceramic chips. A cleaning machine uses multiple transducers, which are bonded to the bottom of the cleaning cylinder with adhesive and connected in parallel to form a transducer for the cleaning machine. The distance between transducer elements (usually 5-10mm for a frequency of 20kH4) is optimal, as it is prone to bending vibration and corrosion of the vibration plate, while the radiation surface is relatively reduced.

通用超声清洗机清洗零件适用性强,已广泛应用于电子、钟表、光学、机械、汽车、航空、原子能工业、医疗器械等许多行业。

The universal ultrasonic cleaning machine has strong applicability in cleaning parts and has been widely used in many industries such as electronics, clocks, optics, machinery, automobiles, aviation, atomic energy industry, medical devices, etc.

超声波清洗机一般安装在某些特定物件清洗的生产流水线上。

Ultrasonic cleaning machines are generally installed on production lines for cleaning specific objects.

典型的软磁器件超声波清洗设备,被清洗物件从进料口可传动的不锈钢网带送人超声波清洗槽清洗,再经喷淋、烘干等工序后出料,实现被清洗物件可直接包装入库。各工序简要说明如下:

A typical ultrasonic cleaning equipment for soft magnetic devices, where the cleaned object is sent to the ultrasonic cleaning tank for cleaning through a stainless steel mesh belt that can be driven from the feeding port, and then discharged through processes such as spraying and drying, achieving direct packaging and storage of the cleaned object. A brief description of each process is as follows:

①进料:物件进料可采用半自动进料或出料:物件出料可采用自动收料或手工收料方式,格被清洗物件装入包装盒内。

① Feed: The object can be fed semi-automatically or discharged: The object can be discharged using automatic or manual feeding methods, and the cleaned object can be packed into the packaging box.

通过上述工序完成了物件实现利用超声波清洗的全过程。

The entire process of using ultrasonic cleaning for objects has been completed through the above steps.

目前,还有一种超声汽相清洗机,它是选用有机溶剂作清洗液,具有*的溶解污垢的能力,用于清洗半导体晶片等净治度要求特别高的物件。

At present, there is also an ultrasonic vapor phase cleaning machine that uses organic solvents as the cleaning solution and has the ability to dissolve dirt. It is used to clean objects such as semiconductor chips that require particularly high cleanliness requirements.

本文由全自动超声波清洗机为您提供,我们的网站是: 我们将以全心全意的热情为您提供服务,欢迎您的访问!

This article is provided to you by a fully automatic ultrasonic cleaning machine. Our website is: We will provide you with wholehearted enthusiasm and welcome your visit!

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:山东省济南市济阳区创业路与启航街交叉口南40米

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1  鲁公网安备37011202000628号